*2014-05-23* hazen, gastler, woodall

• Checkout Vivado project from ​http://edf.bu.edu/svn/DOSI/trunk/firmware/fpga-firmware/microZ9/
  • Rebuild with default options. Ignore many scary "critical warnings"
• Check out bootloader from ​http://edf.bu.edu/svn/DOSI/trunk/firmware/bootloader/
  • Copy bit file from Vivado over existing one
  • "make" to build new boot.bin
  • Mount SD card parition 0, copy over boot.bin
  • It works!
• Check out ​https://ohm.bu.edu/svn/DOSI/trunk/embedded-software/dsau-server/
  • Enter directory and 'make clean; make' (make clean required for now)
  • This creates dsau-server, which should be copied to 'testing' on 2nd (DATA) partition on SD card

*2014-09-08* de carli

• Purchased an 8gb sd u-sd card, now labelled "3"

*2014-09-09* de carli

• Got u-sd card "3" working.
• Current plan:
  • Bit-bang the ADC SPI in the same manner the DDS boards are communicated with
  • Will only require c++ program, no device-tree or verilog modification