= Carrier blade specs =

This is a working page on keeping track of requirements for the BU ATLAS/CMS Carrier blade. 

Expect this to change often. 

== Zone 2 ==
* Ethernet
* CMS TTC

* Parts parts parts
 * TE 1766500-1 Zone 1 connector
 * TE 6469001-1 Zone 2 connector
 * TE 1-1469373-1-ND Guide module
 * Schroff 20818-160 front panel/handle kit
 * Elma 66-536-28 panel
  * 81-300-00 and 81-301-01 handles
  * 81-088-1 microswitch


=== P23 Connections (Base ethernet)

|| P23 Row ||  Port ||  Pair || Base Channel || Function ||
|| 6       ||  0   ||  tx   || 2             || BI_DA (10/100 TX ) ||
|| 6       ||  0   ||  rx   || 2             || BI_DB (10/100 RX ) ||
|| 6       ||  1   ||  tx   || 2             || BI_DC   ||
|| 6       ||  1   ||  rx   || 2             || BI_DD  ||
|| 5       ||  0   ||  tx   || 1             || BI_DA (10/100 TX )||
|| 5       ||  0   ||  rx   || 1             || BI_DB (10/100 RX ) ||
|| 5       ||  1   ||  tx   || 1             || BI_DC  ||
|| 5       ||  1   ||  rx   || 1             || BI_DD   ||


=== P23 Connections (CMS only)

|| P23 Row || Port || Pair || CMS Function ||
|| 4       ||  0   || Tx   || LDAQ out 10Gb/s ||
|| 4       ||  0   || Rx   || LDAQ in 10Gb/s ||
|| 4       ||  1   || Tx   || Reserved STDIO  ||
|| 4       ||  1   || Rx   || Reserved STDIO  ||
|| 3       ||  2   || Tx   || TCDS2 Out (throttling, TTS+)  ||
|| 3       ||  2   || Rx   || TCDS2 In (timing, TTC+) ||
|| 3       ||  3   || Tx   || Precision Clock   ||
|| 3       ||  3   || Rx   || LHC Clock    ||

NOTE:  "Precision Clock" is reverse direction from standard!

== Zone 1 / Power ==
|| ATCA PWR || 12V || stock (ATCA/12V) ||price|| power || notes || 
|| [http://apps.geindustrial.com/publibrary/checkout/PIM400?TNR=Data%20Sheets|PIM400|generic GE PIM400] || [http://apps.geindustrial.com/publibrary/checkout/QBVW033A0B?TNR=Brochures|QBVW033A0B|generic QBVW033A0B Power Module] || [https://www.mouser.com/GE-General-Electric/Power/DC-DC-Converters/Isolated-DC-DC-Converters/PIM400-Series/_/N-brwkv?P=1ykmeb3Z1yzf115 mouser] / [https://www.mouser.com/Search/Refine.aspx?Keyword=QBVW033A0B mouser] || $72/$70 ||400W|| ||
|||| [https://www.artesyn.com/power/assets/atcr250_trn_1330574701_techref.pdf ATCR250 ] || [https://www.digikey.com/product-detail/en/artesyn-embedded-technologies/ATCR250-48D12-03J/454-1528-ND/2797405 digikey ]|| 242.14 || 250W || no blue LED supply. ||
|| [https://www.mouser.com/datasheet/2/632/DS_DIM3R3400-611244.pdf DIM3R3400 ] || [https://www.mouser.com/datasheet/2/632/DS_Q48SC12033-372488.pdf Q48SC12033] || [https://www.mouser.com/ProductDetail/Delta-Electronics/DIM3R3400SFA?qs=sGAEpiMZZMvGsmoEFRKS8JjZftvakwHMkx4fRJnX3SIAOg22KqhURw%3d%3d mouser] / [https://www.mouser.com/ProductDetail/Delta-Electronics/Q48SC12033NRDH?qs=%2fha2pyFaduiV6RSi9tBHVhyFvppwHEErD4WHClezpllYDQpyWlWQAAgQnKiMSRwt mouser] || $90 @ 45cnt(min) / $65 || 400 W || 12V has PMBus.  ||
== Zynq == 
*  [[ZYNQ DBS]] - Zynq daughterboard information
== IPMC ==
*  [https://espace.cern.ch/ph-dep-ESE-BE-ATCAEvaluationProject/PP_IPMC/SitePages/Home.aspx CERN IPMC]
* Power?
== Command module ==
* Below is for each of two command module boards
* So 2x the below for the double-width CMS command module
==== Power/LS connector
  * Mezz side P/N: ET60T–D02–3–08–000–S–R1–S  (Do we want to save a little space by using the Top guide post?)
  * Blade side P/N: ET60S-D02-3-08-000-S-R1-S
  * Power
    * 2 power blades (12V + return) @ 60A max
    * ~200 W per connetor
  * Low speed signals (~16)
 
  || pos || Row 1 || Row 2 || Row 3||
  || 1   || PWR_OK || gnd || UC_nRST ||
  || 2   || TMS || gnd || TCK ||
  || 3   || TDO || gnd   || TDI || 
  || 4   || SDA sense IPMC || gnd || SCL sense IMPC ||
  || 5   || TX IPMC || gnd || Rx IPMC ||
  || 6   || TX ZYNQ || gnd || Rx ZYNQ ||
  || 7   || PWR_ENA || gnd || ZYNQ GPIO2 ||
  || 8   || ZYNQ GPIO3 || gnd || PS_RST || 

==== High-speed connector
* [http://suddendocs.samtec.com/catalog_english/erf8_ra.pdf ERF8-RA ]
* 2.2A per pin (2-powered)
* Mezz side P/N: ERM8-013-01-L-D-RA-DS
* Blade side P/N: ERF8-013-01-L-D-RA
* 2 Tx and 2 Rx to the zynq.
* pinout

  || Pos || Row 1(short) || Row 2(long) ||
  || 1   || gnd   || gnd   ||
  || 2   || Tx1-P || Tx2-P ||
  || 3   || Tx1-N || Tx2-N ||
  || 4   || gnd   || gnd   ||
  || 5   || Rx1-P || Rx2-P ||
  || 6   || Rx1-N || Rx2-N ||
  || 7   || gnd   || gnd   ||
  || 8   || HQ_CLK-P || LHC_CLK-P ||
  || 9   || HQ_CLK-N || LHC_CLK-N ||
  || 10  || gnd   || gnd   ||
  || 11  || TTC-P || TTS-P ||
  || 12  || TTC-N || TTS-N ||
  || 13  || gnd || gnd ||

== Mechanics ==
== carrier buses == 
== Ethernet ==
* UW ESC

  ||Port || type || use ||
  ||     || QSGMII || zynq fabric ||
  ||     || SGMII || zynq arm ||
  ||     || 10/100 || IPMC ||ZYNQ
  ||     || 10/100/1G || SERVICES 1 ||
  ||     || 10/100/1G || SERVICES 2 ||
  ||     || 10/100/1G || Front Panel ||
* mac addrs? 

== Serial number
* EEPROM?

== Power supplies 
* 12V (current: mezz?)
* 3.3V (current: ESC + IPMC?)
* 5V (Zynq supply?)
* 1.2V (CMS timing retimers) 
* 2.5V (CMS XP switch)