| 1 | | * The 3.3V Regulator IC9 needs to be replaced with a regulator capable of an input voltage greater than 12VDC. If using Texas Instruments LP2950-33LPE3 the part orientation fits the silkscreen outline directly (not turned 90/180 degrees) |
| 2 | | * Need to select a 9-12VDC Power supply |
| 3 | | * Need to fabricate RCA & Optical connector adapters as part of the enclosure |
| | 1 | * The 3.3V Regulator IC9 needs to be replaced with a regulator capable of an input voltage greater than 12VDC. If using Texas Instruments LP2950-33LPE3 the part orientation fits the silkscreen outline directly (not turned 90/180 degrees) |
| | 2 | * Need to take power supply and convert to molex input to PCB |
| | 3 | * Need to fabricate RCA & Optical connector adapters as part of the enclosure |
| | 4 | * For optical SPDIF connectors, use 0.1uF ceramic capacitors left over from PCB (5 left) within 1cm of connector body |
